VIBRATION PHASE MEASUREMENT ERRORS CAUSED BY PHASE SENSOR INSTALLATION MISALIGNMENT
DOI:
https://doi.org/10.20535/ngikg2025.XIV.332179Ключові слова:
vibration phase measurement, , phase measurement error, balancingАнотація
Vibration phase measurement errors, caused by phase sensor installation misalignment are considered and estimated. Practical recommendations that allow one to decrease influence of misalignment are presented.
Посилання
Mitchell, John S. Introduction to machinery analysis and monitoring. Penn Well Books, Tulsa, Oklahoma, 1993. 374 p.
Lees A.W. Misalignment in rigidly coupled rotors, Journlal of Sound and Vibration. 2007. Vol. 305 (1–2). pp. 261–271. DOI: 10.1016/j.jsv.2007.04.008.
Xiaoping, Yu. General influence coefficient algorithm in balancing of rotating machinery. The International Journal of Rotating Machinery. 2004. Vol. 10, Issue 2, pp. 85-90. DOI:10.1155/S1023621X04000090
Zhou, S.Y.; Shi, J.J. Active balancing and vibration control of rotating machinery: A survey. The Shock and Vibration Digest. 2001. Vol. 33. pp.361–371. DOI:10.1177/058310240103300501
Bhende, Amit R. A new rotor balancing method using amplitude subtraction and its performance analysis with phase angle measurement-based rotor balancing method. Australian Journal of Mechanical Engineering. 2017. Vol. 18(1). pp. 112–118. DOI: 10.1080/14484846.2017.1415612
Podgórski, Andrzej, Charazka, Pawel. An Algorithm for Estimation of the Amplitude and Phase of a Vibration Signal Used for Determination of Rotating Mass Unbalance. Conference Record. // IEEE Instrumentation and Measurement Technology Conference. (2006) pp. 1425–1429. DOI: 10.1109/IMTC.
328601
Guilherme, Kenji Yamamoto, da Costa, Cesar, da Silva Sousa, João Sinohara. A smart experimental setup for vibration measurement and imbalance fault detection in rotating machinery. Case Studies in Mechanical Systems and Signal Processing. 2016. Vol. 4. pp. 8–18. DOI: 10.1016/j.csmssp.2016.07.001.
